The largest LPG Equipment Supplier &

Manufacturer in Sub-Saharan Africa

Adceng

 

Rego Regulators

301 & 302 SERIES

Compact Regulators

Applications

These compact regulators are designed for smaller outdoor grills and fish cookers. It is intended for use on small portable appliances that use 100,000 BTU's/hr. or less. It may not be used on fixed pipe systems per NFPA 58, 1995 edition.

301
302
302V

Features

  • All metal, die cast construction
  • Molded diaphragms assure close control of burner pressure.
  • Durable valve levers.
  • Variety of model configurations and sizes available.
  • All POL inlet connections are soft nose.

Materials

Body Die Cast Zinc
Bonnet Die Cast Zinc
Spring Steel
Valve Seat Disc Resilient Rubber
Diaphragm Molded Synthetic Rubber
* Maximum flow based on 25 PSIG inlet and factory delivery pressure.

1580M SERIES & AA1580M SERIES

High Pressure Industrial / Commercial Pounds-to-Pounds Regulators.

Application

Designed to reduce LP-Gas and anhydrous ammonia container pressures to between 3 and 125 PSIG. Precision-built with a multi-million BTU capacity, the 1580M series is perfect for such big, tough jobs as crop dryers, asphalt batch mixing plants, road building "tar wagons", heat treating and other large industrial and commercial loads. It's also ideal as a first stage regulator in large multiple operations. The AA1580M series is ideal for use in anhydrous ammonia applications such as blue print machines and heat treating.

Features

  • Large nozzle and straight through flow provides high capacity and resistance to freeze-up.
  • O-ring on retainer assembly provides a dampening effect to reduce vibration.
  • Suitable for both liquid and vapor service.
  • Can be readily fitted with pressure gauge in ¼" F. NPT port.

Materials

Body Forged Aluminum
Bonnet Die Cast Aluminum
Spring Steel
Valve Seat Disc Resilient Rubber
Diaphragm Integrated Fabric and Synthetic Rubber
* Set pressure is established with 100 PSIG inlet pressure and a flow of 500,000 BTU/hr. propane for 1580M Series, 90 CFH/hr. NH3 for AA1582M Series and 180 CFH/hr. NH3 for AA1584M and AA1586M Series.

7525B SERIES

Twin Stage Automatic Changeover Regulators.

Application

These combination automatic changeover, two stage regulators are especially suitable for homes, mobile homes, cottages, construction and other portable two cylinder installations. Empty containers may be replaced without interrupting customer's gas service.

Features

  • Automatic changeover switches from "service" to "reserve" cylinder automatically without interrupting service.
  • The Second Stage Incorporates wide bonnet drip lip vent to guard against freeze-up when properly installed.
  • With 15 PSIG inlet pressure the second stage, regulator is designed to not pass more than 2 PSIG with the seat disc removed.
  • Allows "reserve" cylinder to supplement the flow of gas from the "service" cylinder during extreme load or severe cold conditions.
  • Incorporates molded diaphragm in second stage regulators.
  • Integral indicator gauge.
  • Change over knob and indicator are integral to the first stage.
  • Select brown finish on first stage.

Materials

Body (First Stage) Die Cast Zinc
Body (Second Stage) Die Cast Zinc
Bonnet (First Stage) Die Cast Zinc
Bonnet (Second Stage) Die Cast Zinc
First Stage Nozzle Orifice Brass
Spring Steel
Valve Seat Disc Resilient Synthetic Rubber
Diaphragm Integrated Fabric & Synthetic Rubber
* Set at 100 PSIG inlet pressure.
** Maximum flow based on 25 PSIG inlet pressure and 9" water column delivery pressure.

7525TD SERIES

First Stage Automatic Changeover Regulator.

Application

This High Pressure change regulator is designed for use in domestic and small commercial installations up to 470,000 BTU/hr.

The 7525TD is designed to be attached to the inlet of a second stage regulator to provide two stage system performance. A built-in indicator shows that that change from service to reserve has been made automatically.

Features

  • Body & cover in die cast zinc alloy
  • Diaphragm: synthetic rubber
  • Valve pad: synthetic rubber
  • Min. working temperature: -20° / -29° C
  • Max. working temperature: +160° / +70° C
  • Min. inlet pressure: 25 Psig - 1.7 bar
  • Max. inlet pressure: 290 Psig - 20 bar
  • Safety Relief: No.

LV2302 SERIES

Low Pressure Single Stage Regulators.

Application

A compact, sturdy regulator incorporating many of the quality features found in larger domestic regulators. Ideal for outdoor LP-Gas grills. The regulator reduces cylinder pressure down to burner pressure, normally 11" w.c. It is intended for use on small portable appliances that use 100,000 BTU's/hr. or less. It may not be used on fixed pipe systems per NFPA 58, 1995 edition.

Features

  • Compact size with large capacity rating.
  • Equipped with integral relief valve.
  • Unique bonnet vent profile minimizes vent freeze over when properly installed.
  • Built in pressure tap has plugged ⅛" F.NPT outlet.
  • Large diaphragm provides better regulation and lower lock-up.
  • Classic gold finish.

Materials

Body Die Cast Zinc
Bonnet Die Cast Zinc
Spring Steel
Valve Seat Disc Resilient Rubber
Diaphragm Integrated Fabric and Synthetic Rubber
* Maximum flow based on 10 PSIG inlet and 9" w.c. delivery pressure.

LV4403B SERIES

Low Pressure Second Stage Regulators.

Application

Designed to reduce first stage pressure of 5 to 20 PSIG down to burner pressure, normally 11" w.c. Ideal for medium commercial installations, multiple cylinder installations and normal domestic loads.

Features

  • Large vent helps prevent blockage and has 3/4" F.NPT for vent piping.
  • With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed.
  • Incorporates integral relief valves.
  • Replaceable valve orifice and valve seat disc.
  • Straight line valve closure reduces wear on seat disc.
  • Large molded diaphragm is extra sensitive to pressure changes.
  • Unique bonnet vent profile minimizes vent freeze over when properly installed.
  • Built in pressure tap has plugged 1/8" F.NPT outlet. Plug can be removed with a 3/16" hex allen wrench.
  • Select brown finish.

Materials

Body Die Cast Zinc
Bonnet Die Cast Zinc
Nozzle Orifice Brass
Spring Steel
Valve Seat Disc Resilient Rubber
Diaphragm Integrated Fabric and Synthetic Rubber

Backmount Design

Mounts directly to house line piping. Eliminates need for union joints, elbows, and mounting brackets. Quick and easy to install.

* Backmount design.
** Maximum flow based on 10 PSIG inlet and 9" w.c. delivery pressure.

LV5503B SERIES

Low Pressure Second Stage Regulators.

Applications

Designed to reduce first stage pressure of 5 to 20 PSIG down to burner pressure, normally 11" w.c. Ideal for larger commercial and industrial applications, multiple cylinder installations and large domestic systems.

Features

  • Incorporates integral relief valve.
  • With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed.
  • Replaceable valve orifice and valve seat disc.
  • Straight line valve closure saves wear on seat disc and orifice.
  • Built in pressure tap has plugged 1/8" F.NPT outlet. Plug can be removed with a 3/16" hex allen wrench.
  • Large bonnet vent profile minimizes vent freeze over when properly installed.
  • Extra long lever arm for uniform delivery pressure.
  • Large diaphragm is extra sensitive to pressure changes.

Materials

Body Die Cast Aluminum
Bonnet Die Cast Aluminum
Nozzle Orifice Brass
Spring Steel
Valve Seat Disc Resilient Rubber
Diaphragm Integrated Fabric and Synthetic Rubber
* Maximum flow is based on 10 PSIG inlet and 9" w.c. delivery pressure.

Compact First Stage Regulator LV3403TR

Ideal for use as a first stage regulator on any domestic size ASME or DOT container in propane gas installations requiring up to 31 kilograms per hour. The regulator is factory set to reduce container pressure to an intermediate pressure of approximately .69 Bar.

  • Compact design can be connected to a service valve using either a POL adapter or a Rego Products pigtail.
  • Large threaded 3/8" FNPT bonnet vent can be easily piped-away underground installations without the need of glue kits or extra adapters.
  • Non adjustable.
  • Large flow orifice resists freeze ups due to water concentration in LPG vapor.
  • Design provides for good flow regulation at both high and low container pressures.
  • Built in relief valve and travel stop comply with NFPA 58 over pressure requirements.
  • Incorporates 1/8" FNPT downstream pressure tap for an easy inline check of the regulator's delivery pressure.
  • Molded diaphragm provides an o-ring type seal between the body and bonnet.
  • Body and bonnet are assembled in the USA using the unique, patented RegUlok seal system.
  • Fully painted in brilliant red for complete corrosion protection.
  • Mounting bracket available as an accessory: part number 2302-31.

Materials

Body Zinc
Bonnet Zinc
Spring Steel
Seat Disc Resilient Rubber
Diaphragm Integrated Fabric and Synthetic Rubber

Previous  Home  Top

Call +27 (0)11 493 8209 or This email address is being protected from spambots. You need JavaScript enabled to view it. for indepth information on our comprehensive product range.